Diameter 1mm 100mm Length Laser Sapphire Crystal Rods Doped Sapphire Crystal
-
High Light
sapphire block
,sapphire material
-
MaterialDoped Sapphire Crystal
-
DopedTi3+
-
ColorRed
-
SizeDiameter 1*100mmt
-
Growth MethodCZ
-
ApplicationLaser Device
-
MaterialSolid Laser Material
-
Regional FeatureChina
-
ShippingDHL TNT UPS Air And Sea Mail
-
Place of Originchina
-
Brand Namezmkj
-
Model NumberTitanium doped sapphire
-
Minimum Order Quantity10pcs
-
Priceby case
-
Packaging Detailscustomized plastic box
-
Delivery Time2-4weeks
-
Payment TermsT/T, Western Union, MoneyGram
-
Supply Ability1000pcs/month
Diameter 1mm 100mm Length Laser Sapphire Crystal Rods Doped Sapphire Crystal
Diameter1mm 100mmlength Ti3+ Titanium Doped Doped Colored Sapphire Rods For Laser
Highly frequency Ti+ doped (Titanium doped)sapphire single crstal used in laser/Ti Al2O3 Crystal for laser machine,Titanium doped Sapphire,color sapphire crystal glass lens,s,Ruby optical glass,Titanium sapphire optical lens,Titanium sapphire laser crystals,ruby glass ball
Application
Ti: sapphire (Titanium doped Sapphire, Al2O3:Ti3+) is used for making ultra-short pulse solid-state or wavelength tunable lasers. Ti:sapphire lasers are also very convenient e.g. for pumping test setups of new solid-state lasers (e.g. based on neodymium or ytterbium-doped gain media), since they can easily be tuned to the required pump wavelength and allow one to work with very high pump brightness due to their good beam quality and high output power of typically several watts.
Scitlion is able to offer
Ti2O3 dopand concentration from 0.06% to 0.26% (atm%)
Rod diameter from 2mm to 100mm
Length from 2mm to 100mm
Coating upon your request
Material characteristics
| Materials | Ti:Sapphire |
| Nd Concentration tolerance (wt%) | 0.05-0.35wt% Ti2O3 |
| Orientation |
A-Axis within 5° E-vector parallel to C-Axis |
| End Configuration | flat/flat or Brewster/Brewster ends |
| Absorption Coefficence | 0.5~6.0cm-1 |
| Figure of Merit | 100~300 |
| Coatings | Standard coating is BBAR with R < 5.0% each face at 532 nm and R < 0.5% each face, 650 nm to 850 nm. Other coatings available |
Q1: Can I have samples to test?
A: Yes,we are pleased to supply samples to test and check quality,mixed sample order is available.
Q2: Do you have any MOQ limited? A: Our MOQ: 3pcs Q3: What’s the lead time?
A: Sample :2-7 days.Mass production: 15-20 days.
Q4:How do you ship the goods and how long does it take?
A: We usually ship goods by UPS,FEDEX,TNT. It usually takes 3-5 days to arrive.
Q5: Do you offer guarantee for your products?
A: After test them if not pass test,you can return the goods at any time, we will re-offer you again and also bear shipping fee.
Q6: Do you accept OEM?
A: We have our own brand-metalaser. OEM is also acceptable.
Our products are sold all over the world, you can rest assured.